Pearl Solar Fountain DIRECTIONS

tep 1: Install the Nozzle

Choose your desired spray pattern from the 6 available nozzles. Attach the nozzle to the pump head in the center of the solar panel by pushing it straight down and twisting gently to secure it tightly.

Step 2: Place in Water

Gently lower the fountain into your fish tank, pond, small pool, or water pot. Ensure the water is deep enough for the pump to operate (minimum 8-10cm). Note: Do not allow the solar panel itself to be submerged underwater.

Step 3: Face the Panel Towards the Sun

Position the solar panel to receive direct sunlight. The fountain will automatically start once it receives sufficient light. There are no buttons to press and no plugs required.

Step 4: Enjoy & Maintenance

The fountain will stop automatically when it is cloudy or if the water level becomes too low. Store the device indoors during heavy rain or winter months. To maintain performance, clean the device every 2-4 weeks by rinsing it with fresh water.

Important Notes:

  • Sunlight Only: The product only operates under direct sunlight (it will not run at night or in the shade).
  • Water Level: Never let the water run out completely, as running dry will damage the pump.
  • Versatile Use: Perfect for fish tanks, small ponds, bird baths, or lotus pots.
  • Optimal Care: Ensure the protective glass surface is kept dry and clean for maximum solar efficiency.